Portable Hardness Tester

Product Details:

High precision hardness tester TKM 359CE intended for quick measuring of metal items in laboratorial, manufacturing and field conditions.
Device is intended for non-destructive testing of production quality in metallurgy, mechanical engineering, aircraft, shipbuilding, atomic industry, oil and gas industry.
Hardness tester functions by Leeb method.TKM-359CE Controls Hardness of Following:

  All basic types of metals and alloys without additional calibrations (structural, tool, corrosion-proof, heat-proof, non-corrosive steels and alloys as well as alloys of nonferrous metals, castiron, aluminium, bronze, brass);

  Items with surface hardening and high frequency current hardening;

  Items of complicated configuration;

  Heavy and big items with rough surface.

Exploitation Advantages

  Wide range of controlled metals and alloys.

  Low sensitivity to the curvative and roughness of surface.

  Monitoring of hardness change along the surface.

  Stable measurements independent from force and time of pressing the probe to the surface.

 Possibility of material identification in blank production.

 Control of “volumetric” hardness.

Features of TKM-359CE:

 Impact-, dust- and water- proof housing;

 Intuitive graphic interface;

 Bright color graphic display allows working at below zero temperature and stays bright at any lighting;

 Signalization of exceeding of prescribed readings threshold;

 Unique system of statistic data processing and averaging of readings;

 Fast adjustment of readings and programming of additional calibrations to basic scales by 2 or less standard blocks;

 Flexible device memory for recording of readings and their analysis;

 Programming of additional scales calibrations of hardness tester by 2 or less standard test blocks;

 Fast programming of additional scales by 2 to 10 standard test blocks.

Probes characteristics PhotoProbe TypeLength, mmDiameter, mmApplication«D»13821Solving the bulk of control problems«E»13821Probe with indenter made of polycrystalline of boron nitride intended for controlof materials with high hardness
 
«G»20029Control of items with high structural heterogeneity and roughness Ra from 3.2

Product Details:

Product Details:

Product Details:

Product Details:

High precision hardness tester TKM-459CE intended for quick measuring of metal items hardness in laboratorial, manufacturing and field conditions.

Device is intended for non-destructive testing of production quality in metallurgy, mechanical engineering, aircraft, shipbuilding, atomic industry, oil and gas industry.

• Carbonaceous and structural steels
• Items with surface-hardened layers such as cementation, nitride hardening, high frequency current hardening
• Heat-proof, corrosion-proof, non-corrosive steels
• Plated coating (chrome), overlaying
• Items of complicated configuration

• Stable readings independent from force and time of pressing.
• Easy measuring in hard-to-reach areas.
• Ultra-small control area (from 1 mm).
• Control in slots and blind holes from 5 mm (not provided by rival devices).
• Invisible print on mirror-surface.
• Low sensitivity to the curvative of surface, thickness and weight of product.

• Impact-, dust- and water- proof housing.
• Intuitive graphic interface.
• Bright color graphic display allows working at below zero temperature and stays bright at any lighting.
• Signalization of exceeding of prescribed readings threshold.
• Unique system of statistic data processing and averaging of readings.
• Fast adjustment of readings and programming of additional calibrations to basic scales by 2 or less standard blocks.
• Flexible device memory for recording of readings and their analysis.
• Programming of additional scales calibrations by 2 or less standard test blocks.
• Fast programming of additional scales by 2 to 10 standard test blocks.

Additional Information:

• Item Code: TKM459
• Production Capacity: NA
• Delivery Time: 2 DAYS
• Packaging Details: NIL

Product Details:

High precision hardness tester TKM-459CE intended for quick measuring of metal items hardness in laboratorial, manufacturing and field conditions.

Device is intended for non-destructive testing of production quality in metallurgy, mechanical engineering, aircraft, shipbuilding, atomic industry, oil and gas industry.

•   Carbonaceous and structural steels
•   Items with surface-hardened layers such as cementation, nitride hardening, high frequency current hardening
•   Heat-proof, corrosion-proof, non-corrosive steels
•   Plated coating (chrome), overlaying
•   Items of complicated configuration

•   Stable readings independent from force and time of pressing.
•   Easy measuring in hard-to-reach areas.
•   Ultra-small control area (from 1 mm).
•  Control in slots and blind holes from 5 mm (not provided by rival devices).
•  Invisible print on mirror-surface.
•  Low sensitivity to the curvative of surface, thickness and weight of product.

•  Impact-, dust- and water- proof housing.
•  Intuitive graphic interface.
•  Bright color graphic display allows working at below zero temperature and stays bright at any lighting.
•  Signalization of exceeding of prescribed readings threshold.
•  Unique system of statistic data processing and averaging of readings.
•  Fast adjustment of readings and programming of additional calibrations to basic scales by 2 or less standard blocks.
•  Flexible device memory for recording of readings and their analysis.
•  Programming of additional scales calibrations by 2 or less standard test blocks.
•  Fast programming of additional scales by 2 to 10 standard test blocks.

Product Details:

High precision hardness tester TKM 359CE intended for quick measuring of metal items in laboratorial, manufacturing and field conditions.

Device is intended for non-destructive testing of production quality in metallurgy, mechanical engineering, aircraft, shipbuilding, atomic industry, oil and gas industry.

•   All basic types of metals and alloys without additional calibrations (structural, tool, corrosion-proof, heat-proof, non-corrosive steels and alloys as well as alloys of nonferrous metals, castiron, aluminium, bronze, brass);
•   Items with surface hardening and high frequency current hardening;
•   Items of complicated configuration;
•   Heavy and big items with rough surface.

•   Wide range of controlled metals and alloys.
•   Low sensitivity to the curvative and roughness of surface.
•   Monitoring of hardness change along the surface.
•   Stable measurements independent from force and time of pressing the probe to the surface.
•  Possibility of material identification in blank production.
•  Control of “volumetric” hardness.

•  Impact-, dust- and water- proof housing;
•  Intuitive graphic interface;
•  Bright color graphic display allows working at below zero temperature and stays bright at any lighting;
•  Signalization of exceeding of prescribed readings threshold;
•  Unique system of statistic data processing and averaging of readings;
•  Fast adjustment of readings and programming of additional calibrations to basic scales by 2 or less standard blocks;
•  Flexible device memory for recording of readings and their analysis;
•  Programming of additional scales calibrations of hardness tester by 2 or less standard test blocks;
•  Fast programming of additional scales by 2 to 10 standard test blocks.

Additional Information:

• Item Code: TKM359C
• Production Capacity: NA
• Delivery Time: IN STOCK
• Packaging Details: NIL

Product Details:

High precision hardness tester TKM-359CE intended for quick measuring of metal items hardness in laboratorial, manufacturing and field conditions.

Device is intended for non-destructive testing of production quality in metallurgy, mechanical engineering, aircraft, shipbuilding, atomic industry, oil and gas industry.

•   Carbonaceous and structural steels
•   Items with surface-hardened layers such as cementation, nitride hardening, high frequency current hardening
•   Heat-proof, corrosion-proof, non-corrosive steels
•   Plated coating (chrome), overlaying
•   Items of complicated configuration

•   Stable readings independent from force and time of pressing.
•   Easy measuring in hard-to-reach areas.
•   Ultra-small control area (from 1 mm).
•  Control in slots and blind holes from 5 mm (not provided by rival devices).
•  Invisible print on mirror-surface.
•  Low sensitivity to the curvative of surface, thickness and weight of product.

•  Impact-, dust- and water- proof housing.
•  Intuitive graphic interface.
•  Bright color graphic display allows working at below zero temperature and stays bright at any lighting.
•  Signalization of exceeding of prescribed readings threshold.
•  Unique system of statistic data processing and averaging of readings.
•  Fast adjustment of readings and programming of additional calibrations to basic scales by 2 or less standard blocks.
•  Flexible device memory for recording of readings and their analysis.
•  Programming of additional scales calibrations by 2 or less standard test blocks.
•  Fast programming of additional scales by 2 to 10 standard test blocks.

Product Details:

High precision hardness tester TKM 359CE intended for quick measuring of metal items in laboratorial, manufacturing and field conditions.

Device is intended for non-destructive testing of production quality in metallurgy, mechanical engineering, aircraft, shipbuilding, atomic industry, oil and gas industry.

•   All basic types of metals and alloys without additional calibrations (structural, tool, corrosion-proof, heat-proof, non-corrosive steels and alloys as well as alloys of nonferrous metals, castiron, aluminium, bronze, brass);
•   Items with surface hardening and high frequency current hardening;
•   Items of complicated configuration;
•   Heavy and big items with rough surface.

•   Wide range of controlled metals and alloys.
•   Low sensitivity to the curvative and roughness of surface.
•  Monitoring of hardness change along the surface.
•  Stable measurements independent from force and time of pressing the probe to the surface.
•  Possibility of material identification in blank production.
•  Control of “volumetric” hardness.

•  Impact-, dust- and water- proof housing;
•  Intuitive graphic interface;
•  Bright color graphic display allows working at below zero temperature and stays bright at any lighting;
•  Signalization of exceeding of prescribed readings threshold;
•  Unique system of statistic data processing and averaging of readings;
•  Fast adjustment of readings and programming of additional calibrations to basic scales by 2 or less standard blocks;
•  Flexible device memory for recording of readings and their analysis;
•  Programming of additional scales calibrations of hardness tester by 2 or less standard test blocks;
•  Fast programming of additional scales by 2 to 10 standard test blocks.

Additional Information:

• Item Code: TKM359
• Production Capacity: NA
• Delivery Time: 2 DAYS
• Packaging Details: NIL