Impact Testing Machine

Product Details:

The pendulum Impact Tester, Model : Auto Impact-30 is designed for conducting Izod, Charpy test. The test method confirm to BS: 131: PART 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993. In Auto Impact Tester, pendulum will lift, specimen will get loaded and pendulum will release automatically. Once specimen breaks,result will display on digital panel, and auto brakes will apply immediately. The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izodtesting.On auto release, the pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and height of rise after rupture of the test specimen and is read on digital panel in Joules

Additional Information:

• Packaging Details: In Wooden Box

Product Details:

The pendulum Impact Tester, Model : Auto Impact-30 is designed for conducting Izod, Charpy test.The test method confirm to BS: 131: PART 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993.In Auto Impact Tester, pendulum will lift, specimen will get loaded and pendulum will release automatically. Once specimen breaks,result will display on digital panel, and auto brakes will apply immediately.The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izodtesting.On auto release, the pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the differencebetween the height of drop before rupture and height of rise after rupture of the test specimen and is read on digital panel in Joules.Charpy Test :The Charpy test piece rests on support anvils, fitted on the baseof the machine rigidly held in position by Allen screws.End stopper is provided for quickly and accurately locating thetest piece centrally between the supports.

Product Details:

The pendulum Impact Tester, Model IT-30 is designed forconducting Izod, Charpy test. The test methods confirm toBS:131:PART 4-1972 (Amended 15 Aug. 1993) BSEN:10045-2:1993.The pendulum is mounted on antifriction bearings. It has twostarting positions, the upper one for Charpy the lower one for Izodtesting. On release, the pendulum swings down to break thespecimen & the energy absorbed in doing so is measured as thedifference between the height of drop before rupture of the testspecimen and is read from the maximum pointer position on the digital readout in case of electronic machines.There are two strikers and one combined support anvil availablefor fitting in to the pendulum and on the base of machine for theIzod, Charpy test respectively. Changing from one striker toanother is achieved simply by fixing the new striker into it’sposition.
Charpy test:
The Charpy test piece rests on alloy steel support anvils, fitted onthe base of the machine rigidly held in position by Allen screws.End stopper is provided for quickly and accurately locating thetest piece centrally between the supports.
Izod Test:
The Izod Test piece is clamped vertically in Izod support fitted onthe base of the machine. The support is provided with a machinedvertical groove to suit the test piece size. The front clamp pieceand the Allen screw enable clamping of the test piece in correctheight with the help of Izod setting gauge supplied.

Product Details:

The Impact Tester offered with 300 & 400 J energy exclusively forCharpy test confirming to ASTM E-23. This machine isgeometrically checked in the works to the more stringentrequirements of the American standard.The accuracy of the machine is then verified by PROOF TEST bytesting standard test specimens supplied by the NIST, USA. Twosets (Low & high energy-1 Set (4 Nos.) each.) must agree with thenormal values within certain tolerance specified

Product Details:

FIE's Charpy pendulum Impact Testing Machine, Model :IT-50 (ASTM) serves for conducting Charpy impact testingaccording to ASTM-E23 standard to determine the behaviors ofthe metal especially of steel casting under impact stresses.General Description :Model: Auto Impact - 50 (ASTM)Fully automatic machine easy to operate.For safety machine cover with enclosure which are havingdoor interlocks so operator can works safely.High resolution encoder is fitted in machine which can read theabsorbed energy less than 1J.Features :Touch screen HMI.USB output data logging.Thermal printer output.Manual operation via touch screen.Calibration features.New file creation.